Comdial FX Series Spécifications télécharger pdf (Page 87)

Programming the Comdial System

GCA39-814 Rev 3, Issue 9/01 Page 14 Printed in the USA

Software Initialization (Hands on)

Objectives

• Use the instructor-provided software to initialize a Comdial system.

• Initialize the Comdial system by loading CCB software into its flash memory.

Background

• Prior to initialization, a CPU board for any Comdial FX system can only run DEMO software

for 1 hour. This DEMO mode time is used for the software upgrade and initialization of the

switch.

• If a system is not initialized within the hour, it will reset. Do the following steps to initialize

or upgrade the class systems with new port sizes and features.

Class Exercise

• Using the information provided in this section, perform a software initialization or upgrade of

your switch (as the instructor determines).

• It is not necessary to call Comdial for system software numbers to complete this exercise.

The instructor will provide system software numbers for this exercise.

NOTE: Remember that DIPSWITCH 8 on the Services Board has to be ON to complete the

initialization or upgrade.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 251 252

Pas de commentaire

Comdial FX Series Spécifications Page 87