Comdial FX Series Spécifications télécharger pdf (Page 233)

VMMI Programming Exercises

GCA39-082 Rev 2, Issue 9/01 Page 2 Printed in the USA

Step 1: Specifying the Circuits

When programming two systems to use tie line connections, note that both systems must have

the same number of actual circuits and trunks.

NOTE: Generally, a T-1 circuit between two systems with mismatched line types will ring the T-1 lines

when the circuit is first connected, and will continue to ring until the lines are programmed correctly.

In the example below, there is an FX system and a DXP system linked together by tie lines using

a T-1 circuit (direct connection.)

• The FX system has two tie line trunks located on a T-1 board in the 7

slot of the system.

• The DXP system has two tie line trunks on a T-1 board in its 5

slot.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 251 252

Pas de commentaire

Comdial FX Series Spécifications Page 233