Comdial and FXT Guide de l'utilisateur télécharger pdf (Page 42)

4. CHOOSE your speed dial route from the following list:

•

PRESS line button to select outside line,

•

DIAL 00 to select prime line or last line used,

•

DIAL 01 to 16 to select line group,

•

PRESS INTERCOM button or dial 8 to select intercom.

NOTE: You may need a pause between numbers to compensate for differ

ences in response time between your system and the host system (ask your

attendant about this). To store a pause, press HOLD, then continue dialing. If

your system is behind a host system that needs a hookflash to access a

feature, press TAP to store a hookflash, then continue dialing.

5. DIAL number (up to 16 digits long—include

* and # if

needed).

6. PRESS TRNS/CNF to store the number.

7. REPEAT previous steps until all numbers are stored.

HANG UP to end.

As you program numbers, fill in the identification strips on your telephone as

well as this table.

Personal Speed Dial Numbers

(Keypad Buttons)

36 Single Line Proprietary Telephone Station User’s Guide

Programming GCA70-251

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

Pas de commentaire

Comdial and FXT Guide de l'utilisateur Page 42