Comdial and FXT Manuel d'utilisateur télécharger pdf (Page 19)

Upgrading the Impact FX Software

Each system requires a system software keying code. This keying code, or system software key, is an

encrypted string of characters, that you obtain from a Comdial representative and enter into VMMI

programming during software upgrade operations. The system software key enables feature sets, system

capacity, and special stand alone features as ordered. The system software key controls the active feature

set of the installed software by controlling access to the database configuration of all features.

Using the System Software Key

Since you use the VMMI program to enable the system software key, you must have the software file

(the xxxxxxxx.bin file) stored on the PC from which you plan to run the VMMI program. Further, you

must determine the system serial number and then call a Comdial representative to obtain the system

software keying code that the system uses to enable the software.

Download the latest xxxxxxxx.bin file from the Comdial Online Support Server. Reach the Online

Support Server through the Comdial Internet home page on the worldwide web at www.comdial.com.

Once there, follow the prompts to get to the Support Server and then to get to the location where you can

download software upgrades for the FX system.

Determine the system serial number by using the VMMI program, and call the Comdial representative

at:

— 1-800-669-2663 (calls from within the U.S.A.)

— 1-804-978-2290 (international calls)

NOTE: You do not need to install a hardware mechanism on the serial port of the PC to enable the

system software (although you do need to do so when you obtain the magic number needed to

turn on the CTI applications). Having that hardware mechanism installed does not interfere with

system software enabling.

Upgrading the Impact FX Software – 15

Programming the Features GCA40–218

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Comdial and FXT Manuel d'utilisateur Page 19